Phone icon

01622 790 356 for expert advice

Amtico Pressure Sensitive Adhesive

Please note we cannot guarantee these images colour match exactly with the product. They can only be used as general illustration purposes.

Pressure Sensitive Adhesive 6kg by Amtico

Product code: Pressure Sensitive Adhesive 6kg (AMTICO)

from £39.17 per each (inc. VAT)

Delivery Timeframe: 7-10 Days

Pressure Sensitive Adhesive 6kg by Amtico

  • Amtico Pressure Sensitive Adhesive is solvent free, non-flammable and protected against bio-degradation and mould growth.
  • 6kg will cover approximately 18m².
  • For areas that are subject to large variations in temperature or where under-floor heating is installed, Amtico HT Adhesive should be used.
  • Also available in a 14kg container.
  • Instructions:
  • Before use, subfloors must be smooth, dry and free from any contaminants which might affect adhesion.
  • Tiles, adhesive and sub-floor should be allowed to stabilise to room temperature for 24 hours prior to installation.
  • Stir the adhesive well and then spread evenly over the sub-floor, or if preferred, the adhesive may be rolled using a paint roller pre-wetted with adhesive.
  • Allow the adhesive 10 to 20 minutes to develop sufficient tack before attempting to lay tiles.
  • Lay the floor covering onto the adhesive within 3 hours and press each tile from the centre outwards to exclude air and ensure overall contact with the adhesive.
  • Roll the completed installation with a 45kg flooring roller from end to end and side to side. Remove any adhesive from the face of the tiles with a moistened cloth.
  • Light foot traffic is allowed 4 hours after installation but the finished floor should be protected from point loads and heavy traffic for at least 24 hours.

Any questions? Email us, LiveChat us or just give us a buzz - we're the Flooring Gurus!

4 people are currently viewing this product
each
each Price

£39.17